Find Cnc Milling And Boring, OEM Cnc Milling And Boring, OEM Large Cnc Milling And Boring on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Machining Parts > CNC milling and boring > OEM large cnc milling and boring

OEM large cnc milling and boring

Basic Info

Model No.: USM-205

Product Description

In machining, boring is the process of enlarging a hole that has already been drilled (or cast), by means of a single-point cutting tool (or of a boring head containing several such tools), for example as in boring a gun barrel or an engine cylinder. Boring is used to achieve greater accuracy of the diameter of a hole, and can be used to cut a tapered hole. Boring can be viewed as the internal-diameter counterpart to turning, which cuts external diameters.

OEM cnc milling and boring


Process

Milling is a cutting process that uses a milling cutter to remove material from the surface of a workpiece. The milling cutter is a rotary cutting tool, often with multiple cutting points. As opposed to drilling, where the tool is advanced along its rotation axis, the cutter in milling is usually moved perpendicular to its axis so that cutting occurs on the circumference of the cutter. As the milling cutter enters the workpiece, the cutting edges (flutes or teeth) of the tool repeatedly cut into and exit from the material, shaving off chips (swarf) from the workpiece with each pass. The cutting action is shear deformation; material is pushed off the workpiece in tiny clumps that hang together to a greater or lesser extent (depending on the material) to form chips. This makes metal cutting somewhat different (in its mechanics) from slicing softer materials with a blade.

The milling process removes material by performing many separate, small cuts. This is accomplished by using a cutter with many teeth, spinning the cutter at high speed, or advancing the material through the cutter slowly; most often it is some combination of these three approaches.[2] The speeds and feeds used are varied to suit a combination of variables. The speed at which the piece advances through the cutter is called feed rate, or just feed; it is most often measured in length of material per full revolution of the cutter.

There are two major classes of milling process:

In face milling, the cutting action occurs primarily at the end corners of the milling cutter. Face milling is used to cut flat surfaces (faces) into the workpiece, or to cut flat-bottomed cavities.

In peripheral milling, the cutting action occurs primarily along the circumference of the cutter, so that the cross section of the milled surface ends up receiving the shape of the cutter. In this case the blades of the cutter can be seen as scooping out material from the work piece. Peripheral milling is well suited to the cutting of deep slots, threads, and gear teeth.


Technology and Quality:

Offering our client best possible and most sustainable solutions to their requirement. Production procedure

Step1: Drawing and technical requirement analysis, production lofting;

Step2: Material cutting, trimming, groove, cleaning, bending, rolling, dimension & NDT inspection

Step3: From part assemble to whole assemble with accurate template and platform, dimension & NDT inspection, welding, dimension & NDT inspection;

Step3: Casting, forging, stamping, machining if necessary

Step4: Final dimension & NDT inspection;

Step5: Surface treatment;

Step6: Package, Loading and Lashing when delivery;

UniSite have a perfect managing system and quality control system which from initial work.

ISO9001-2008/CCS; BV manufacturer capability qualification.

Taken part in the CHINA DREDGING ASSOCIATION

Quality, health, safety and environment (QHSE)

Production guidelines

In-house safety training to our staff

Checking all the production equipment periodically

Preventing pollution, accidents and health hazards, auditing

See to following photos:

milling parts


Photos of our Cnc milling and boring

Cnc Milling and Boring OEM Cnc Milling and Boring OEM Large Cnc Milling and Boring for sale OEM Large Cnc Milling and Boring


How to contact us?

Send your Inquiry Details in the Below, Click "Send" Now!



Contact us if you need more details on Cnc Milling and Boring. We are ready to answer your questions on packaging, logistics, certification or any other aspects about OEM Cnc Milling and Boring、OEM Large Cnc Milling and Boring. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Machining Parts > CNC milling and boring