4" DTH Hammer Disassemble Tool Desk for Mining
Basic Info
Model No.: BLHB-5&BLHB-8
Product Description
Model NO.: BLHB-5&BLHB-8 Type or Model: Blhb-5 for 3-5" Hammer and Blhb-8 for 6-8" Hammer Operate Hammers: 3" 4" 5" 6" 7" 8"-30" Diameter Hammer Key Word: Hammer Breakout Bench,Hammer Disassemble, Aplication: DTH Hammer Demount/Dismant Tool for Quarry Mining Operation: Very Easy Poeration Steps. Specification: CE &SGS HS Code: 82071990 Size: 920*510*875 and 1100*620*875 Weight: 200kg and 230kg Spare Parts: Top Sub Wrench and Driver Sub Wrench Market: Global Color: Blue, Other Color Available Trademark: BESTLINK Origin: Xiamen China DHT Hammer Breaout Bench from Xiamen Bestlink factory co., Ltd.
The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling. It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a Breakout Bench is the solution.
This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH hammers between 3-8".
The breakout bench is available in two designs, one for 3-5"hammer, and another for 6-8" hammer.
Note! ! ! The breakout bench is delivered with wrench keys.
The operation method as below:
1). Put hammer on the bench.
2). Adjust the position of the hammer and wrench; Use wrench to block the top sub side of hammer; Let wrench and jack in the same face.
3). Fix K-shaped base with nut.
4). Fix wrench with nuts.
5). Shake handle of jack slowly till top sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.
7). Adjust the position of hammer and wrench; Use wrench to block the drive chuck of hammer; Let wrench and jack in the same face.
8). Fix hammer
9). Fix K-shaped base and the wrench with nut.
10). Shake handle of jack slowly till drive chuck away from hammer.
Specifications
1. For disassembling the dth hammer
2. Easy operation
3. Low cost
4. For 3" to 30" hammers
5. CE certificate
Contact us if you need more details on Hammer Disassemble Desk. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dth Hammer Breakout Desk、Hammer Disassemble Tool. If these products fail to match your need, please contact us and we would like to provide relevant information.
The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling. It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a Breakout Bench is the solution.
This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH hammers between 3-8".
The breakout bench is available in two designs, one for 3-5"hammer, and another for 6-8" hammer.
Note! ! ! The breakout bench is delivered with wrench keys.
The operation method as below:
1). Put hammer on the bench.
2). Adjust the position of the hammer and wrench; Use wrench to block the top sub side of hammer; Let wrench and jack in the same face.
3). Fix K-shaped base with nut.
4). Fix wrench with nuts.
5). Shake handle of jack slowly till top sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.
7). Adjust the position of hammer and wrench; Use wrench to block the drive chuck of hammer; Let wrench and jack in the same face.
8). Fix hammer
9). Fix K-shaped base and the wrench with nut.
10). Shake handle of jack slowly till drive chuck away from hammer.
Specifications
1. For disassembling the dth hammer
2. Easy operation
3. Low cost
4. For 3" to 30" hammers
5. CE certificate
Model | BLHB-5 | BLHB-8 |
Operate hammers | 3-5" | 6-8" |
Length | 920mm | 1100mm |
Width | 510mm | 620mm |
Height | 875mm | 875mm |
Weight | 200kg | 230kg |
Spare parts list | Part No | |
3-5" | 6-8" | |
Compressing Jack | CCX-01 | CCX-01A |
Upper lock block | CCX-02 | CCX-02A |
Lower lock block | CCX-03 | CCX-03A |
Wrench Jack | CCX-04 | CCX-04A |
Oil Pump | CCX-05 | CCX-05A |
Tools | |
Top sub wrench | |
Wrench flats(mm) | Part No. |
Flat 55mm | HCCX-55 |
Flat 65mm | HCCX-65 |
Flat 75mm | HCCX-75 |
Flat 95mm | HCCX-95 |
Flat 102mm | HCCX-102 |
Flat 120mm | HCCX-120 |
Flat 140mm | HCCX-140 |
Driver sub wrench | |
Hammer | Part No. |
3.5" | QCCX-3.5 |
4" | QCCX-340 |
5" | QCCX-350 |
6" | QCCX-360 |
8" | QCCX-380 |
Contact us if you need more details on Hammer Disassemble Desk. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dth Hammer Breakout Desk、Hammer Disassemble Tool. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : DTH Drilling Tools > DTH Hammer Breakout Bench
Other Products
Hot Products
Pushing Air Bag for Marble Block CuttingBq90 Down The Hole (DTH) Drilling Machine for Hard RockSecoroc Cop DTH Back Hammer for Drilling & MiningMost Popular Mining DTH Hammer Breakout BenchDTH Drill Rod Pipe Drill Tube for DTH DrillingTungsten Carbide Taper Drill Chisel Bit for QuarryingShank Hex 22*108mm Taper Drill Rod with Angle 6-12 DegreeShank Hex 19X108 and 22X108 Chisel Bit Integral RodHydro Pushing Bag for Stone QuarryingLow, Middle, High Pressure DTH Hammer for DrillingHydraulic Block Push Machine for QuarrySplit-AG Splitting Expansive Mortar for Breaking StoneHot Sale Pushing Air Bag for Marble and Granite Block Cutting12 1/4" IADC537 TCI Tricone Bit for Mining and OilingHard Rock Down The Hole DTH Drill Bits/Button Bits7 Degree 36mm Button Rock Drill Jack Hammer Bits