Find Breakout Bench, Hammer Breakout, DTH Hammer Breakout Bench on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > DTH Drilling Tools > DTH Hammer Breakout Bench > Breakout Bench for Down The Hole Hammer

Breakout Bench for Down The Hole Hammer

Basic Info

Model No.:  BLHB-5, BLHB-8

Product Description

Model NO.: BLHB-5, BLHB-8 Brand Name: Bestlink Model No: Blhb-5, Blhb-8 Specification: CE HS Code: 82071990 Quality: Good Quality MOQ: 1set Trademark: BESLINK Origin: Xiamen Fujian, China Specifications
1. For disassembling the DTH Hammer
2. Easy operation
3. Low cost
4. For 3" to 30" hammers
5. CE certificate
DHT Hammer Breaout Bench from Xiamen Bestlink factory co., Ltd.

The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling. It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a Breakout Bench is the solution.

This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH hammers between 3-8".
The breakout bench is available in two designs, one for 3-5"hammer, and another for 6-8" hammer.
Note! ! ! The breakout bench is delivered with wrench keys.

The operation method as below:
1). Put hammer on the bench.
2). Adjust the position of the hammer and wrench; Use wrench to block the top sub side of hammer; Let wrench and jack in the same face.
3). Fix K-shaped base with nut.
4). Fix wrench with nuts.
5). Shake handle of jack slowly till top sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.
7). Adjust the position of hammer and wrench; Use wrench to block the drive chuck of hammer; Let wrench and jack in the same face.
8). Fix hammer
9). Fix K-shaped base and the wrench with nut.
10). Shake handle of jack slowly till drive chuck away from hammer
Model BLHB-5 BLHB-8
Operate hammers 3-5" 6-8"
Length 920mm 1100mm
Width 510mm 620mm
Height 875mm 875mm
Weight 200kg 230kg
Spare parts list Part No
3-5" 6-8"
Compressing Jack CCX-01 CCX-01A
Upper lock block CCX-02 CCX-02A
Lower lock block CCX-03 CCX-03A
Wrench Jack CCX-04 CCX-04A
Oil Pump CCX-05 CCX-05A
 

Contact us if you need more details on Breakout Bench. We are ready to answer your questions on packaging, logistics, certification or any other aspects about DTH Hammer Breakout Bench、DTH Hammer Breakout. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : DTH Drilling Tools > DTH Hammer Breakout Bench