3.5 to 8 Inch DTH Hammer Disassembling Breakout Bench

Model NO.: BLHB-5, BLHB-8 Max Break out Torque: 60 Ftlb Operation Height: 750 Mm Specification: 1060 x 930 x 1050 mm HS Code: 73269010 Hammer Size: 3.5-8 Inch Hydraulic Pressure Range: 0-20 Mpa Trademark: BESTLINK Origin: Xiamen, China The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling.
It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get
Stuck, a Breakout Bench is the solution.
This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH
Hammers between 3" and 8". Select right breakout bench depending on voltage and power source.


Breakout Bench Operation Method
1. Put hammer on the bench
2. Adjust the position of hammer and wrench; Use wrench to block the top sub side of hammer; Let wrench and jack in the same face.
3. Fix K-shaped base with nut.
4. Fix wrench with nuts.
5. Shake handle of Jack slowly till top sub away from hammer.
6. After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the Hammer.
7. Adjust the position of hammer and wrench; Use wrench to block the drive chuck of hammer; Let wrench and jack in the same face.
8. Fix hammer.
9. Fix K-shaped base and the wrench with nut.
10. Shake handle of Jack slowly till dive chuck away from hammer.

Model	BLHB-5	BLHB-8
Operate hammers	3-5"	6-8"
Length	920mm	1100mm
Width	510mm	620mm
Height	875mm	875mm
Weight	200kg	230kg

Contact us if you need more details on Breakout Bench. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hammer Breakout Bench、Hammer Disassembling Bench. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : DTH Drilling Tools > DTH Hammer Breakout Bench