Find Breakout Bench, Hammer Breakout, DTH Hammer Breakout Bench on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > DTH Drilling Tools > DTH Hammer Breakout Bench > Dismantling of DTH Drilling Tools DTH Hammer Breakout Bench

Dismantling of DTH Drilling Tools DTH Hammer Breakout Bench

Basic Info

Model No.:  ECX3-8

Product Description



Model NO.: ECX3-8


Application: Quarry, Mining and Civil Construction


Condition: New


Weight: 350-800 Kgs


Transport Package: Wooden Case


Origin: Xiamen, China




Usage: Disassemble DTH Hammer


Hammer Range: 3.5′′-8′′


Type: Manual and Electric


Trademark: BESTLINK


Specification: ISO


HS Code: 82071990


Products Feature

DTH Hammer Loosening Tools: The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling.It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a DTH Hammer Assembling equipment is the solution.

This handy but powerful DTH Hammer Loosening Tools / DTH Breakout Bench

can easily be placed in a workshop or container and it breaks DTH hammers between 3.5''-8".



There are two kinds of bench to disassemble the dth hammers.



Manual:

The operation method as below:

1). Put hammer on the bench.

2). Adjust the position of the hammer and wrench; use wrench to block the top sub side of hammer; let wrench and jack in the same face.

3). Fix K-shaped base with nut.

4). Fix wrench with nuts.

5). Shake handle of jack slowly till top sub away from hammer.

6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.

7). Adjust the position of hammer and wrench; use wrench to block the drive chuck of hammer; let wrench and jack in the same face.

8). Fix hammer

9). Fix K-shaped base and the wrench with nut.

10). Shake handle of jack slowly till drive chuck away from hammer.



Electric

The standard motor request power source with 3phase, 380V,50Hz. we can adjust the motor as customers request.



Specifications

1. for disassembling the dth hammer

2. easy operation

3. low cost

4. for 3" to 8" hammers



Main Technical Data

Operating principie by Hydraulic Jack
(manual)
by electric motor
Model CX-5 CX-8 ECX3-8
Operate hammers 3-5" 6-8" 3.5-8"
Length 920mm 1100mm 1060mm
Width 510mm 620mm 930mm
Height 875mm 875mm 1050mm
Weight 350kg 350kg 800kg

Contact us if you need more details on Equipment. We are ready to answer your questions on packaging, logistics, certification or any other aspects about DTH Tools、Hammer Breakout. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : DTH Drilling Tools > DTH Hammer Breakout Bench

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters