IC697MDL250 Discrete Input Module

The IC697MDL250 Discrete Input Module by GE Fanuc has 32 points comprised of four isolated groups, which ensures each group of eight points can be used on a different AC supply phase. GE Series 90-70 Cpu Parts,Io Bus Terminator Plug,Ge Fanuc Terminal Block PLC CPU PARTS Programmable PLC Communicate MODULES Robots DCS.

This 120 VAC module is equipped with a 20 ms input filter and is proximity switch compatible.

The IC697MDL250 module`s reactive input is in accordance with IEC standard type 2. Additionally, input characteristics work with a vast number of available proximity switches. LEDs indicate ON-OFF status for each point on the logic/PLC side of the circuit and are easily located at the top of the module. The IC697MDL250 module is mechanically keyed to guarantee appropriate replacement with a similar field type. I/O references are user-configurable eliminating the need for jumpers or DIP switches. Configuration is completed via MS-DOS or Windows programming software, and the configuration function is already installed on the device.

The IC697MDL250 module can be used with a wide variety of input devices, including pushbuttons, limit switches, or selector switches and electronic proximity switches (2- or 3-wire type). The module`s input circuitry allows for low heat dissipation, which in turn assists with extreme reliability and longevity.

This module is equipped with a mechanical key that helps prevent accidental substitution of types in a given slot. The key fits a specifically shaped spot on the board below the connector. When the module is originally installed, the key fastens onto the backplane center rail. When the module is removed, the key stays in the center rail, requiring the slot to take only identical module types. If the user needs to change the module location in the rack after the key has been attached to the rack, the key can be removed by pushing up and unhooking the latch. The key and module can then be reinserted as needed.

Technical Specifications

---

Rated Voltage:	120 volt AC
Number of Inputs:	32 Inputs (4 Isolated groups of 8)
Input Current:	10 mA
Current Required:	0.35 Amps
Freq:	60 Hz
DC Power:	No

IC697CHS750 A five slot rear mounting PLC rack, the GE Fanuc 90-70 IC697CHS750 accepts all IC697 PLC module types. Featured on the GE Fanuc 90-70 IC697CHS750 are rear...
IC697CHS770 GE Fanuc 90-70 IC697CHS770 Accepts all IC697 PLC module types, and IC687 (VME) I/O and Communications module types. GE Fanuc 90-70 IC697CHS770 Accepts plug-in... GENERY ELETRIC IC200ALG264

GENERY ELETRIC IC200ALG322

GENERY ELETRIC IC200ALG620

GENERY ELETRIC IC200ALG630

GENERY ELETRIC IC200MDL740


GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC200UDR005-AA

GENERY ELETRIC IC660BBD025

GENERY ELETRIC IC697BEM711

GENERY ELETRIC IC697BEM713

GENERY ELETRIC IIC697BEM731

GENERY ELETRIC IC697BEM733

Contact us if you need more details on General Electric IC697MDL250. We are ready to answer your questions on packaging, logistics, certification or any other aspects about GE Discrete Input、Series 90 Four Isolated Groups. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : General Electric Fanuc > GE PLC 90-70 CPU Parts