Find Export Quality Tricone Bit, TCI Tricone Bit, 12.5 Inch Tricone Bit on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Tricone Bit > 6 9 12.5 Inch TCI Tricone Bit with Export Quality

6 9 12.5 Inch TCI Tricone Bit with Export Quality

Basic Info

Model No.:  IADC622/115/537/437 3-26inch

Product Description

Model NO.: IADC622/115/537/437 3-26inch Certification: BIN, API Type: Center Drill Bit Use: Well Drilling Size Diameter: 3-26inch Bearing Type: Metal Sealed Bearing Trademark: Bestlink Specification: 3-26inch HS Code: 82071910 Customized: Customized Length: Taper-length Material: Diamond Suitable Formatiom: Soft, Medium Soft, Hard, Mediu Usage: Well Drilling , Offshore Oil,Gas Field,Dolomite Market: Brazil,Columbia,USA... Transport Package: Steel Box Origin: China Tricone drill bit:
Type Tricone Bit (3 7/8"~26", steel/milling tooth or TCI)
Application oil field, water well, geothermal, underground foundation, quarry
Formation sticky, soft, medium hard, hard formations
Bearing open/sealed bearing, rubber/metel seal bearing
packing wooden/steel box
payment term T/T, LC
MOQ one piece
Delivery within 25days for standard model, within 35days for customized

description of drill bit
 
(1) Cutting Structure of this series tricone rock bit :
The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit.The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
 
(2) Gauge Structure of this series tricone rock bit :
Multiple gauge protection with gauge trimmers on heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
 
(3)Bearing Structure of this series tricone rock bit :
High precision bearing with two thrust faces. Balls lock the cone.Hardface heard bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved and suitable for high rotary speed.
 
(4)Seal and Lubrication of this series tricone rock bit :
The advanced metal seal package consists of two metal seats and two elastic energizers. Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force, and achieve the bearing seal. In the drilling, metal seal are relatively dynamic, and the energizers are static. This will improve the reliability and durability of bearing seal. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
 
2 main product:
 
(1) IADC code: 116 117 126 127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111 121 131 346 347 417 427 437 517 527 537 617 627 637 737 837 832 415 425 435 445 525 625 635 416 427 436 446 447 516 526  537 547 516 536  535
 
(2) Sizes:  From 2 7/8 to 26"larger sizes for hole opener bit ,reamer bit
 
(3)bearing type: sealed bearing and non-sealed bearing ;HJ(metal sealed journal bearing)   ;HA (rubber sealed journal bearing ;aircooled bearing type
 
(4)formation or layer: soft ,medium soft ,hard,medium hard,very hard formation
IADC   WOB RPM Application
(KN/mm) (r/min)
111/114/115 0.3-0.75 200-80 very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
116/117 0.35-0.8 150-80 very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
121 0.3-0.85 200-80 soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
124/125 180-60
131 0.3-0.95 180-80 soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
136/137 0.35-1.0 120-60
211/241 0.3-0.95 180-80 medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds.
216/217 0.4-1.0 100-60
246/247 0.4-1.0 80-50 medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
321 0.4-1.0 150-70 medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble
324 0.4-1.0 120-50
437/447/435 0.35-0.9 240-70 very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone
517/527/515 0.35-1.0 220-60 soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
537/547/535 0.45-1.0 220-50 soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
617/615 0.45-1.1 200-50 medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
637/635 0.5-1.1 180-40 hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble
Note: Above limitts of WOB and RRPM should not be used simultaneously

PIN SIZE
Bit Diameter API PIN
(inch) (mm)
3 7/8"~5 1/4" 98~134 2 3/8", 2 7/8"
5 5/8"~6 3/4" 143~171 3 1/2"
7 1/2"~9 1/2" 190.5~241 4 1/2"
9 5/8"~13 3/4" 245~350 6 5/8"
14 5/8"~26" 371~660.4 7 5/8"

IADC Code Classifications

STEEL TOOTH BITS

IADC 1 SERIES DRILL BITS
These bits are used to drill low-compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hardfacing is used to control tooth wear. On the softest bit types this hardfacing completely covers the bit teeth.
IADC 2 SERIES DRILL BITS
These bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hardfacing is applied to reduce tooth wear.
IADC 3 SERIES DRILL BITS
These bits are used to drill hard and abrasive formations. Very short, closely spaced teeth with minimum amounts of hardfacing are used for breakage resistance. These bits must withstand high loads and drill abrasive formations with a crushing, cutting action.

TCI BITS

IADC 4 SERIES DRILL BITS
These bits are used to drill low compressive strength, very soft formations. The bits maximize the use of both conical and chisel inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit balling in sticky formations.
IADC 5 SERIES DRILL BITS
These bits are used to drill low compressive strength, soft to medium soft formations. Drill bit design features are used to enhance bit penetration rates. Some reduction in cone offset and insert projection is used to improve cutter durability. Insert numbers and pitch is controlled to prevent tracking.
IADC 6 SERIES DRILL BITS
These bits are used to drill high-compressive strength, medium hard formations. A small amount of cone offset and low insert projection is used to prevent cutting structure damage when hard streaks are encountered. Increased numbers of blunter, smaller diameter inserts are used to increase life in harder, more abrasive formations.
IADC 7 SERIES DRILL BITS
These bits are used to drill hard and abrasive formations. A more wear-resistant grade of tungsten carbide insert is used to prevent wear. Low cone offset with increased numbers of breakage resistant cutters add to the required bit durability.
IADC 8 SERIES DRILL BITS
These bits can be used to drill extremely hard and abrasive formations. Wear-resistant inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.

Contact us if you need more details on Export Quality Tricone Bit. We are ready to answer your questions on packaging, logistics, certification or any other aspects about TCI Tricone Bit、12.5 Inch Tricone Bit. If these products fail to match your need, please contact us and we would like to provide relevant information.
  • 1/2" Inch Brass Gate Valve with Handwheel

    Model NO.: CFM-035 Thread Position of Valve Rod: Inside Gate Valve Usage: Drain Standard: ANSI Application: Industrial Usage, Water Industrial Usage, Household Usage Certificate: ISO 9001 SGS Ce Supply Ability: 8000 Set/Sets Per Week Control Valve Delivery Time: 30 Days After Receiving The Payment Origine: Qingdao Brand:...

  • High Quality 7 Inch Digital Photo Frame with Muti Function

    Model NO.: 702 Size: 7 Inch Material: Plastic Feature: Portable, USB, HD Language Support: Multi Language Usage: Gifts, Decorative, Advertising Resolution: 800*480/1280*800 Video Format Support: RM, RMVB, MKV, MOV, M4 V, Mpg, Flv, PMP, AVI, Vob Extended Type Supports: SD, MMC, Ms, U Disk, etc Application: Advertising/...

  • Plastic Injection 40-Inch TV Frame Mould with TV Frame Mould with SGS Certification, 35-38 Hardness Custom Design Ok

    Runner: Cold Runner Design Software: UG Installation: Plastic Injection Mould Certification: TS16949, CE, ISO Standard: DME Customized: Customized ISO9001:2008: Passed RoHS: Carry out Euromold: Took Part in Experience: 18 Years Material: Customized Delivery Time: Customized Quality: High Trademark: YIXUN Transport Package:...

  • 10 Inch Quad Waterproof Monitor with High Quality (BR-TMQ1001)

    Model NO.: BR-TMQ1001 Certification: CE, FCC, RoHS, EMI/EMC, ISO9001: 2000 Interface Type: VGA Horizontal Resolution: 420tvl Screen: General Screen Scanning: Line by Line Scan Material: LCD Sensor: CCD Place of Origin: Guangdong, China Car Make: All Vehicle, All Vehicle Brand Name: Brvision Warranty: 12 Months Power: 5W...

Product Categories : Tricone Bit

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters